1. A number of our stamps are mounted on thin cassettes. These cassettes slide easily into our acrylic handles. The sides of our handles are finished with hard white maple and are grooved to assist handling and placement while stamping. Our cassettes are imprinted with a matching image of the rubber stamp. This image is easily viewed through the acrylic handle. Once removed from the handle, the stamp can be displayed much the same as your typical 3/4” mounts.
2. As you slide the cassette into our handle, it is held in place by a small holding device. This holding device aids in providing a snug fit for the cassette. As seen below, the angle of the cassette matches the angle of the handle. Both of our handles and cassettes are marked with letters {a}-{b}-{c} or {d}. These letters provide an easy marrying system for the user.
3. The cassette is inserted with one simple slide motion and removed with the same kind of ease.
4. Our un-mounted kits include deeply etched red rubber. They are fully cut out and backed with Cling Cushion foam. Simply turn over our handle and adhere the rubber stamp to the acrylic portion. The acrylic portion of our handles can be used with your current collection of clear stamps as well. It is universal and will work with all unmounted stamps.
